Substantiation of IACS and RS requirements for the selection of hull materials for structures operated at low climatic temperatures. Part 1 — crack start resistance
Abstract
The article considers the applicability of shipbuilding steels regarding crack start resistance. Probable correlations of impact energy vs. fracture toughness parameters have been analyzed. A partial change in the application of the provisions of the IACS unified requirement (UR) S6 has been suggested.
About the Authors
V. Yu. Filin
NRC Kurchatov Institiute — CRISM Prometey
Russian Federation
Russian Federation
DSc
St. Petersburg
A. V. Ilyin
NRC Kurchatov Institiute — CRISM Prometey
Russian Federation
Russian Federation
DSc, associate professor
St. Petersburg
A. V. Larionov
NRC Kurchatov Institiute — CRISM Prometey
Russian Federation
Russian Federation
St. Petersburg
E. D. Nazarova
NRC Kurchatov Institiute — CRISM Prometey
Russian Federation
Russian Federation
St. Petersburg
References
1. GOST 9454-7. Method for testing the impact strength at low, room and high temperature]. Moscow, Izdatelstvo standartov Publ., 2008. — 10p. (In Russian).
2. Rules for the Classification and Construction of Sea-Going Ships. Part II. Hull. Part XIII Materials. Russian Maritime Register of Shipping. St. Petersburg, 2023. (In Russian)
3. IACS UR S6 Use of Steel Grades for Various Hull Members — Ships of 90 m in Length and Above. Rev.9 Corr.2 Nov 2021 — 10 p.
4. GOST 5521-76 Weldable steel for shipbuilding]. Moscow, USSR State committee of products quality management and standards. 1976. — 20 p. (In Russian)
5. GOST 5521-93 Steel rolled plate of special purpose]. Moscow, Izdatelstvo standartov Publ., 2003. — 20 p.
6. Filin V.Yu. Quality Control of Steels for Large-Sized Welded Structures of the Arctic Shelf: Application of Russian and Foreign Requirements. Inorganic Materials: Applied Research, 2019, Vol. 10, No. 6, pp. 1492 — 1503.
7. Habashi M., Tvrdy M. Relationships between KIc and CVN at the lower shelf of the transition curve CVN-T//Journal of Materials Science and Engineering A.5 (5-6) (2015), pp. 209 — 220.
8. Barsom J.M. and Rolfe S.T. Correlations between KIc and Charpy V-notch test results in the transition-temperature range/ASTM STP 466, 1969. pp. 281 — 302.
9. ASTM E1921-20 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range. ASTM International, 2020. — 41 p.
10. ASME BPVC Section XI Rules for Inservice Inspection of Nuclear Power Plant Components. Division 1 Rules for Inspection and Testing of Components of Light-Water-Cooled Plants. ASME, 2021. — 781 p.
11. PNAE G-7-002-86 Normy rascheta na prochnost’ oborudovanija i truboprovodov atomnykh energeticheskykh ustanovok [Norms of strength calculations of the equipment and pipelines of nuclear power plants]. Moscow, Energoatomizdat Publ., 1989. — 525 p.
12. Structural Integrity Assessment Procedures for European Industry (SINTAP). Project No. BE95-1426, Final Procedure, November 1999.
13. BS 7910:2013+A1:2015. Guide to methods for assessing the acceptability of flaws in metallic structures. BSI Publ.— 492 p.
14. Filin V.Yu. Razrabotka kriteriev treschinostoikosti i hladostoikosti materialov svarnykh konstrukcij mosrkogo shelfa na osnove mechaniki razrusheniya. Diss. dokt. tech. nauk [Fracture mechanics based development of fracture toughness and cold resistance criteria for the materials of offshore structures. Dr. tech. sci thesis]. St. Petersburg, 2019. — 425 p.
15. GOST R 52927-2105 Rolled of normal, increased — and high-strength steel for shipbuilding. Specifications]. Moscow, Standartinform Publ., 2017. — 64 p.
Review
For citations:
Filin V.Yu., Ilyin A.V., Larionov A.V., Nazarova E.D. Substantiation of IACS and RS requirements for the selection of hull materials for structures operated at low climatic temperatures. Part 1 — crack start resistance. Research Bulletin by Russian Maritime Register of Shipping. 2023;1(72/73):48-58. (In Russ.)
Views:
33
Email this article 